Brother DCP-9055CDN driver

The printer has a principle of laser print technology and uses the electrophotographic printing component. The device is also a single-pass laser printer with an inbuilt StarSaphire (SS1000) 400 MHz processor that is mainly responsible for its high speed and quality. The warm-uprate for the printer from the sleep mode is less than 33 seconds at a temperature of 23⁰C. On the other hand, if the printer wakes up from Power ON, the warm-up time is less than 35 seconds at the same temperature.

Brother DCP-9055CDN driver Supported Windows Operating Systems

Brother DCP-9055CDN driver Supported Mac Operating Systems

Specifications

The inbuilt standard internal memory capacity is up to 128 MB of RAM which combines with the processor to bring an impressive performance altogether. In terms of paper capacity, the printer has a paper input for a standard tray of 250 sheets of a plain or legal sheet of paper. Also, the paper input also has a supporting automatic document feeder (ADF) which can hold up to 35 sheets of plain paper. The maximum weight of the article should be 80 gsm.

Also, the paper output tray can hold up to 150 sheets of printed paper in a face-down mode with just one face up. The printer also contains a responsive control panel with a liquid crystal display (LCD) type that supports 22 characters and five lines. This display screen measures 2.72 in width and 1.06 inches in length. Users can as well note that the device has a print resolution of 600 x 600 dots per inch (dpi) while the top quality resolution is 2400 x 600 dpi.

This printer supports different kinds of media types. These types include plain, thin, thick, recycled, thicker and glossy paper. The standard trays can contain various sizes such as A4, A5. B6, Folio, B5, and many more. The usual media weight in the trays is between 16 to 28 lbs whereas that of the multipurpose tray is between 16 to 43 pounds. Download Brother DCP-9055CDN driver from Brother Website

[Installation Instructions] How to Download / Installation procedure

Note: Do not connect the USB cable until requested by the installer. If you connect to the network, make sure the network cable is connected before running the installer

Windows

• Close all software programs running on your computer.
• Turn on the printer.
• Click the Download button on this page.
• Click the downloaded file. The files will be extracted and the installation process will automatically begin.
• Follow the instructions on the screen to continue and complete the installation.

Mac

• Download the file. For the location where the file is saved, check the computer settings.
• Double-click the downloaded file and mount it on the Disk Image.
• Then Double-click the mounted Disk Image.
• Double-click the packaged file in the folder. Installation starts automatically.

To install later, select Save in step 4 and choose a location on your hard disk. When ready to install, search and double-click the file. This will automatically extract and start the installation process. Follow the instructions on the screen to continue the installation.

if there is a link error please report to us via the Contact. Thank you for your participation in downloading the latest printer drivers download for your Printer so that your driver and software are always updated.

Useful link (if you need), learn more below for other Printer drivers:

• Brother Printer Driver
• HP Printer Driver
• Canon Printer Driver
• Epson Printer Driver
• Samsung Printer Driver
• Sharp Printer Driver