Canon i-SENSYS LBP7110Cw driver

The Canon i-SENSYS LBP7110Cw model of printer can produce both monochrome and color documents. The printing rate is up to 14 pages per minute for both modes with color laser-beam print technology. Its average resolution is about 600 x 600 dots per inch (dpi) under normal circumstances. At the same time, the print resolution can reach 1200 x 1200 dpi. Moreover, its warm-up time is approximately 20 seconds or less from the power-on mode.

Canon i-SENSYS LBP7110Cw driver Downloads for Windows 32-bit – 64-bit and macOS..

Supported Toner Cartridges

731 Cyan Toner Cartridge : Yields approx 1500 Pages
Toner Cartridge Black 731 : Upto 1400 Pages
731 Toner Cartridge Yellow : Yields upto 1500 Pages
Toner Cartridge 731 Magenta : Approx 1500 Pages

Canon i-SENSYS LBP7110Cw driver Supported Windows Operating Systems

Canon i-SENSYS LBP7110Cw driver Supported Mac OS.

Canon i-SENSYS LBP7110Cw driver Supported Linux Operating Systems

Linux (32-bit), Linux (64-bit)

Specifications

The first page out time for both monochrome and color documents is about 18 seconds or less. In comparison, its maximum duty cycle reaches 30,000 pages in a month with a print margin of 5 mm for top, bottom, right, and left. Regarding media handling, the standard paper input size is up to 150 sheets of plain paper. On the other hand, the output paper tray is up to 125 sheets of printed paper face-down.

The supported media types include plain paper, heavy paper, transparent films, coated paper, glossy films, labels, and index cards. On the other hand, the compatible media types include A4, B5, A5, legal, letter, executive, statement, foolscap, 16K, and envelope C5. In terms of the media weights, the range is between 60 and 220 gsm. Concerning the power requirements, the acceptable content is between 220 and 240 volts for a frequency of 50/60 Hz.

Conversely, the maximum power consumption is up to 800 watts or even less. The active printing mode requires 340 watts or less, while the standby mode uses about 10 watts. Furthermore, the sleep mode uses approximately 0.9 watts with a typical electricity consumption (TEC) of 1.0 kWh per week. The noise level at active printing is about 6.52 B or less while the standby mode produces inaudible noise.
Download Canon i-SENSYS LBP7110Cw driver from Canon Website

[Installation Instructions] How to Download / Installation procedure

Note: Do not connect the USB cable until requested by the installer. If you connect to the network, make sure the network cable is connected before running the installer

Windows

• Close all software programs running on your computer.
• Turn on the printer.
• Click the Download button on this page.
• Click the downloaded file. The files will be extracted and the installation process will automatically begin.
• Follow the instructions on the screen to continue and complete the installation.

Mac

• Download the file. For the location where the file is saved, check the computer settings.
• Double-click the downloaded file and mount it on the Disk Image.
• Then Double-click the mounted Disk Image.
• Double-click the packaged file in the folder. Installation starts automatically.

To install later, select Save in step 4 and choose a location on your hard disk. When ready to install, search and double-click the file. This will automatically extract and start the installation process. Follow the instructions on the screen to continue the installation.

if there is a link error please report to us via the Contact. Thank you for your participation in downloading the latest printer drivers download for your Printer so that your driver and software are always updated.

Useful link (if you need), learn more below for other Printer drivers:

• Brother Printer Driver
• HP Printer Driver
• Canon Printer Driver
• Epson Printer Driver
• Samsung Printer Driver
• Sharp Printer Driver