Brother MFC-8910DW driver, Software Download

The Brother MFC-8910DW printer model belongs to the same series as the MFC-8510DN printer model. The printer uses an electrophotographic laser print technology and a standard memory of 128 MB of RAM. There is an optional memory of 1 slot DDR2 SO-DIMM that can take up to 256 MB. The printer possesses a liquid crystal display (LCD) touchscreen of 22 characters and two lines. The power source of the printer is through an alternating current of 220 to 240 volts with 50/60 Hz.

Brother MFC-8910DW driver Supported Windows Operating Systems

Brother MFC-8910DW driver Supported Mac Operating Systems

Specifications

The power consumption of the printer on the average depends on the printer mode that may include printing and copying. The peak performance of this printer uses approximately 1200 watts at 25⁰C. The copying mode reasonably requires 694 watts but 350 watts at quiet mode. The deep sleep mode, on the other hand, uses about 1.4 watts. The effective method uses about 8.1 watts and approximately 6.3 watts in the sleep mode when the LAN is on.

Brother MFC-8910DW printer model has a width of about 491mm, a depth of 415mm and a height of 447mm. The weight of this printer, on the other hand, is about 16.7 kg. The produced noise level is up to 59 dB while printing and 37 dB while ready to print. The temperature range is about 10 to 32.5⁰C for operations and a storage temperature range of 0 to 40⁰C. However, humidity ranges between 20 and 80% without condensation for activities and 10 to 80% for storage.

The automatic document feeder (ADF) component of the printer acts as a supplementary supply and can hold 50 pages. For the best results, users are to maintain the environmental conditions such as the temperature and humidity range. The supported document size include 147.3 to 215.9 mm in ADF width and a length between 147.3 to 355.6 mm. Download Brother MFC-8910DW driver from Brother Website

[Installation Instructions] How to Download / Installation procedure

Note: Do not connect the USB cable until requested by the installer. If you connect to the network, make sure the network cable is connected before running the installer

Windows

• Close all software programs running on your computer.
• Turn on the printer.
• Click the Download button on this page.
• Click the downloaded file. The files will be extracted and the installation process will automatically begin.
• Follow the instructions on the screen to continue and complete the installation.

Mac

• Download the file. For the location where the file is saved, check the computer settings.
• Double-click the downloaded file and mount it on the Disk Image.
• Then Double-click the mounted Disk Image.
• Double-click the packaged file in the folder. Installation starts automatically.

To install later, select Save in step 4 and choose a location on your hard disk. When ready to install, search and double-click the file. This will automatically extract and start the installation process. Follow the instructions on the screen to continue the installation.

if there is a link error please report to us via the Contact. Thank you for your participation in downloading the latest printer drivers download for your Printer so that your driver and software are always updated.

Useful link (if you need), learn more below for other Printer drivers:

• Brother Printer Driver
• HP Printer Driver
• Canon Printer Driver
• Epson Printer Driver
• Samsung Printer Driver
• Sharp Printer Driver